要看看你洗的是什麽產品，用的是什麽洗劑然後決定你用的超聲波的頻率。如果你那香蕉视频下载地址是好多個槽體的，有加熱有風幹或者有慢拉等等，要考慮的因素就多了。溫度啊，洗劑濃度啊清洗時間啊等等都要考慮。

It depends on what product you wash and what lotion you use, and then determines the frequency of the ultrasound you use. If your ultrasonic cleaning machine has many tanks, such as heating, air drying or slow pulling, there are many factors to consider. Temperature, detergent concentration, cleaning time and so on should be considered.

如何減少香蕉视频下载地址對產品的損害

How to reduce the damage of ultrasonic cleaning machine to products

建議你這樣做：和你購買的香蕉视频下载地址商家聯係，詢問下他們。

Suggest you do this: and you buy the ultrasonic cleaning machine business contact, ask them.

1. 選擇合適的頻率：一般機械五金件除油除拋光蠟用28KHZ ，光學玻璃、實驗開發用40K，實驗室研究用100K，LCD半導體部件1MHZ及以上。

1. Select appropriate frequency: 28kHz for general mechanical hardware, 40K for optical glass and experimental development, 100k for laboratory research, 1MHz or above for LCD semiconductor components.

2.合適的功率，現在一般廠家提供的香蕉视频下载地址發生器都能調節功率，在滿足清洗要求和清洗時間的前提下來選擇合適的功率。

2. Suitable power, now the ultrasonic cleaning machine generator provided by general manufacturers can adjust the power, and select the appropriate power on the premise of meeting the cleaning requirements and cleaning time.

3.合適的清洗液溫度：除蠟除油一般用堿性清洗液溫度控製在75度左右為合適，如要求工作效率和清洗質量一些有機溶劑可供選擇。 其實你該注明所清洗的工件是什麽，損傷的現象，我相信這麽多高手一定都會豪無保留的給你提供方案。

3. Suitable temperature of cleaning solution: alkaline cleaning solution is generally used for dewaxing and degreasing. The temperature should be controlled at about 75 ℃. Some organic solvents can be selected if the working efficiency and cleaning quality are required. In fact, you should indicate what the workpiece you are cleaning and the phenomenon of damage. I believe that so many experts will provide you with solutions without reservation.